CONTROL ARM – Remove & Replace – Lower,One Side – [DOES NOT include alignment.]
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center ste
DISC ROTOR – Remove & Replace – Front,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation. Chec
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
CHANGE MOTOR OIL AND FILTER. GREASE ALL LUBE POINTS. PERFORM VEHICLE INSPECTION AND CHECK ALL FLUIDS
MELDA S. gave our service a 5 star review on 1/8/2024